Electronics: Transistors
Transistors are used as electronic switches and current amplifiers. They have three "legs" - base , collector and emitter. A small current to the base switches on the transistor allowing a much larger current to flow between collector and emitter. The ratio of the collector current to the base current is known as the "amplification" or "gain" of the transistor (hfe = Ic/Ib).

They come in various different shapes and sizes and it is important to decide which type is required at the outset.Factors to be considered are voltage and power handling capacities, cost and availability. Transistors require a base voltage of at least 0.6V with respect to the emitter to "turn on". (Darlington Pair transistors require 1.2 V). A limiting resistor - typically 1K is required in the base circuit of the transistor stage to prevent overrunning and hence overheating and destruction of the transistor. Transistors come in NPN and PNP types. It is important to use the correct type when designing and building circuits.

Copyright D&T Online 1997

Dial Solutions
Produced by Dial Solutions Ltd		 NAAIDT
in association with the NAAIDT		 Webulator
Build and host your own website with Webulator